To select a different vehicle, Enter information here:
Subaru BRZ Aftermarket Radio Installation Kits - fits Scion FR-S and Toyota 86
The Subaru BRZ shares its dash opening and main radio connectors (10-pin and 6-pin) with the Toyota 86 / Scion FR-S, but the rest of the wiring follows the Subaru playbook - the newer BRZ (2016-2020) uses the same adapter set as other Subarus of its era, plus an extra amplifier turn-on wire that other models do not need. That amp wire is why the BRZ gets its own page. Every BRZ, FR-S, and 86 uses the same main harness - the USB adapter and the camera/steering-wheel harness depend on your year (steps 2 and 3). The 28-pin adapter in step 3 is optional for cars without a backup camera or steering wheel audio buttons.
Choosing a head unit: any double-DIN unit fits with the right kit below. Popular picks are Pioneer and Sony Apple CarPlay / Android Auto units, ATOTO Android units (the AM/FM adapter is already included with our ATOTO harnesses), and vehicle-specific Android units like iDoing - check what wiring those include; the USB, AM/FM, and 28-pin adapters below are still the plug and play way to keep your factory features.
Buy the whole kit - 2013-2020 BRZ
Rather order it all at once? The complete kit is everything in steps 1, 2, and 3 - main harness, AM/FM antenna adapter, USB retention harness, and the 28-pin backup camera / steering wheel adapter - at 10% off the individual prices. Pick your headunit and your model year and we build it to match your car:
Ordering an ATOTO kit? Those harnesses have the AM/FM antenna adapter built in, so that kit is the harness, the 28-pin adapter, and the USB harness.
Or build it piece by piece below - the steps cover the same parts, and you can leave out anything your car does not need.
1Main harness + AM/FM antenna adapter - every BRZ needs one of these pairs
The main harness connects power, ground, and speakers. The AM/FM antenna adapter is a separate piece you need alongside it - except with our ATOTO harnesses, which already include it. Pick the row that matches your new headunit:
Pioneer Direct Wire Harness (AHH-70-1761)$17Add to cart orupgrade
to
Pioneer Direct Wire with Parking Brake Bypass (AHH-70-1761PB)$23Add to cart
AM/FM Antenna Adapter (AHH-1601-4)$19Add to cart UPGRADEThe parking brake bypass version is the same Pioneer direct wire harness, $6 more, with a Pioneer Parking Brake Bypass module already wired in. Pioneer headunits watch the parking brake wire and lock out certain screens and settings while the vehicle is moving; the module simulates an engaged parking brake so those stay available. Built in, it saves you sourcing a separate bypass module and splicing it into the harness. Everything else about the two harnesses is identical - if you do not want the bypass, take the standard one.
Sony Direct Wire Harness (AHH-70-1761SO)$20Add to cart +
AM/FM Antenna Adapter (AHH-1601-4)$19Add to cart 
ATOTO A6PF, S8MS & S8 Lite Direct Wire$29 +
AM/FM adapter includedNothing else to add - the antenna adapter comes with this harness.
ATOTO S8 & F7 Direct Wire$29 +
AM/FM adapter includedNothing else to add - the antenna adapter comes with this harness.
Installing another brand (Kenwood, Alpine, JVC, etc.)? Use the Metra 70-1761, which you will wire to your headunit's own harness - it needs the AM/FM adapter too:
Metra 70-1761 - 10-pin and 6-pin adapter$6Add to cartAM/FM Antenna Adapter (AHH-1601-4)$19Add to cart 2022 and newer BRZ (and GR86): your car needs a modified version of the antenna adapter, not the standard one shown above - see step 4 before you order.
Amplifier note: the BRZ has a factory amplifier for the front door speakers, switched on through pin 9 of the 10-pin connector - an extra amp turn-on wire that regular Subaru installs do not need. Wiring your own Metra 70-1761? Make sure that wire gets powered, or email us and we will confirm the right hookup for your headunit.
2USB adapter - keep your console USB port - match it to your year
328-pin adapter - backup camera, aux input, and steering wheel buttons
This is the harness that connects the factory 28-pin connector to your new headunit. It retains:
-Backup camera functionality (it provides 6 vdc to power the factory camera and passes the video signal to the new headunit)
-Auxiliary input (***Analog audio input only. USB is not included - that is step 2***)
-Reverse gear signal
-Vehicle speed signal
-E-brake signal
-Steering wheel control signals, on a connector for the iDatalink Maestro SW
Tell us your model year when you order. The 2013-2015 BRZ is wired differently from the 2016-2020 BRZ, and the BRZ did not get steering wheel audio buttons until the 2017 model year - so we build this adapter to match your car. Pick your year on the listing below and we will send the correctly wired part.
If your car has no backup camera, no aux input, and no steering wheel audio buttons, you can skip this adapter - the main harness in step 1 covers the rest.
Using the steering wheel buttons with your new headunit also requires a steering wheel control interface module - email us with your headunit choice and we will confirm the right setup (Maestro SW for the Subaru BRZ).
Scion FR-S and Toyota 86 owners: your main harness, USB, and AM/FM adapters are the same as the BRZ, but the 28-pin camera/steering-wheel adapter is the Toyota version - it is sold here (AHH-7558, $54), and those cars use the Axxess ASWC-1 for the steering wheel buttons.
If your car has the factory navigation unit, the Backup Camera adapter on the navigation-equipped Subaru page applies instead - along with the same main harness, AM/FM, and USB adapters.
42022+ BRZ (and Toyota GR86) - one extra piece
The 2022+ models still use the main harness from step 1 and the USB adapter from step 2, plus the 38-pin jumper in place of the 28-pin adapter in step 3:
Do not order the standard AM/FM antenna adapter from step 1 for these cars. The 2022+ models need a modified version of it instead - email us and we will build one for your vehicle.
Questions about your specific year or trim? Email us and we will point you to the right parts.
Vehicle Compatibility
The parts on this page fit these Subaru models:
- 2013-2020 and 2022-2026 Subaru BRZ
Not sure which category your vehicle falls into? Use the selector at the top of this page, check our Vehicle Wiring & Compatibility Database, or email us (inquiry@autoharnesshouse.com).
www.autoharnesshouse.com
inquiry@autoharnesshouse.com