Direct Wire Harness for ATOTO X10, F7, S8 & the 10-inch S8MS - NOT S8 Lite or the 7-inch and 9-inch A6PF/S8MS (Fits 2006-2012 Honda/Acura Models)

Item Number: AHH-70-1722ATOTO

IMPORTANT: This adapter fits the ATOTO X10, F7, standard S8, and the 10-inch S8MS (sold as S8G1104MS, S8EG1104MSB or S81104MSFX), and the 10.1-inch ATOTO A6 PF (A6G110PF). It does NOT fit the 7-inch or 9-inch ATOTO S8MS, the S8 Lite, or the 7-inch and 9-inch A6 PF models. If you are installing one of those, please click here for the correct adapter.

Installing an ATOTO X10, F7, or select S8 series head unit in your Honda or Acura is simple with this direct-wire harness. It arrives pre-wired with an ATOTO connector on one side and a factory Honda/Acura plug on the other, making setup quick and reliable. The AM/FM radio adapter is included with this adapter. No need to purchase separately! Please note, this harness does not include the steering wheel control wires - those are located on a separate connector. If you want steering wheel audio controls, you will need our steering wheel control adapter. Order them together and AutoHarnessHouse.com will gladly provide custom wiring guidance via email: inquiry@autoharnesshouse.com.

What's included:

• AM/FM radio adapter for the ATOTO unit
• Direct Wire Adapter - All Speaker signals are already wired. Just plug in both ends!

Installation:

1) Simply plug the direct wire harness into your ATOTO double-DIN or single-DIN head unit and the factory Honda or Acura wiring connectors. You will not need to do any cutting or splicing for installation.
2) For full functionality, the parking brake signal wire is already grounded for you. This connection ensures proper navigation, safety lockout, and video playback controls on ATOTO stereos. The reverse signal wire is only necessary if you plan to install a backup camera, making this harness ideal for ATOTO head unit installs with rear view camera support.

Purchase:

Price: $29.00

Vehicle Fitment:

(If a known model is not listed, let us know)

Acura
2008-2012 RDX Non-Navigation
2013 RDX

Honda
2006-2011 CIVIC
2007-2011 CRV
2007-2008 FIT
2008-2010 ODYSSEY Non-Navigation

ATOTO Headunit Compatibility

ATOTO uses 2 different headunit connectors. Please make sure you have the right one for the unit that you're installing!
DOES NOT FIT the 7-inch or 9-inch ATOTO A6 PF (A6G2A7PF, A6G2B7PF, A6G2C7PF, A6G209PF) - EXCEPT the 10.1-inch A6 PF, which DOES fit this adapter, listed below
ATOTO A6 (will fit older A6 models only)

ATOTO F7WE
ATOTO F7 XE
ATOTO F7 (All other Variations)

DOES NOT FIT the ATOTO S8 Lite or the ATOTO S8 MS models - with ONE exception, listed below, which DOES fit this adapter!
ATOTO S8 MS sold as S8G1104MS, S8EG1104MSB or S81104MSFX - one radio, three part numbers depending on where you bought it (this is the 10-inch floating-screen S8 MS). Check the model number printed on your radio or shown on your receipt.
ATOTO A6 PF 10.1-inch floating screen - A6G110PF (despite the A6 PF name, this one uses the standard 20-pin connector, unlike the 7-inch and 9-inch A6 PF)
ATOTO A5L 10-inch floating screen - A5LG110T and A5LG110PT (the 7-inch A5L does NOT fit - it uses the other connector)
ATOTO S8 10.1-inch S8G1104PRN
ATOTO S8UP 10-inch (Sold On Amazon!)
DOES NOT FIT the newest ATOTO lines that switched to a 16-pin harness - the V10 (V10G110OC) and the S8 Gen4 (S84G110PB). Quick check: this adapter is for radios that come with a 20-pin power harness. If yours came with a 16-pin harness, email us before you order and we will tell you which adapter you need.
ATOTO X10 9-inch (Sold by AutoHarnessHouse - Lower price than Amazon!)
ATOTO X10 10-inch (Sold by AutoHarnessHouse - Great Deal!) - also X10G110E, X10G110ESM and X10G110PESM (the 10.1-inch X10 with the passenger / co-pilot screen)
ATOTO X10 12.5-inch X10G225E

We carry a compatible adapter for these other ATOTO models. Click here for the ATOTO A6PF / S8 Lite / S8 MS version of this same adapter. Please email us or check out the Similar items below.