Direct wire harness for ATOTO A6PF, S8MS & S8 Lite Headunits (fits 2008+ Honda/Acura - See compatibility information below)

Item Number: AHH-70-1729ATOTO-A6PF

If you've got the ATOTO A6 Professional (A6 PF) headunit, you're in the right place! The wiring connector for the ATOTO A6 PF is different from the other ATOTO models (See the "Standard" ATOTO wiring adapter for 2008+ Honda/Acura HERE) This harness is the simplest way to install an ATOTO A6PF, S8 Lite, or S8MS headunit in your Honda or Acura. It is pre-wired with the ATOTO A6PF connector on 1 end and the Honda connector on the other.

Note: this adapter fits the 7-inch and 9-inch ATOTO A6 PF (A6G2A7PF, A6G2B7PF, A6G2C7PF, A6G209PF). It does NOT fit the 10.1-inch A6 PF (A6G110PF) - despite the A6 PF name that radio uses the standard ATOTO S8 & F7 connector, so it needs our other ATOTO adapter instead.

What's included:

• ATOTO A6 PF Direct wire adapter
• A dedicated Steering Wheel Control wire is included in the Honda connector, offering a unique signal not typically found in most aftermarket installation harnesses.
• Reverse signal originates from the ATOTO A6PF connector, allowing for proper integration elsewhere in the vehicle.

Installation:

1) Simply plug in both ends - one to the ATOTO A6 PF headunit and the other to your vehicle.
2) Connect the Reverse connection (only necessary if installing a backup camera).

Purchase:

Price: $31.00

Vehicle Fitment:

(If a known model is not listed, let us know)

Acura
RL 2009 to 2012
TL 2009 to 2014
TLX 2015 to 2019
TSX 2009 to 2015
ZDX 2010 to 2013

Honda
ACCORD 2008 to 2015 Non-Navigation
ACCORD 2008 to 2012 With Factory Navigation
ACCORD CROSSTOUR 2010 to 2015 Dark Gray Dash, with DUAL climate
ACCORD CROSSTOUR 2010 to 2015 Tan Dash
ACCORD CROSSTOUR 2010 to 2015 With Factory NAV
CIVIC 2012 to 2012 With Dark Gray Satin Dash
CIVIC 2012 to 2015 With Factory Navigation
CIVIC 2013 to 2015 Non Navigation
CRV Non Navigation 2012 to 2016
CRV with Navigation 2010 to 2016
CRZ 2011 to 2013
FIT 2009 to 2019
INSIGHT 2010 to 2014
ODYSSEY 2008 to 2010 Non Navigation
ODYSSEY 2011 to 2013
ODYSSEY 2014 to 2017 EX, EX-L, Touring
ODYSSEY 2014 to 2017 LX
PILOT 2009 to 2015
RIDGELINE 2009 to 2019

ATOTO A6PF and S8MS Headunit Compatibility

ATOTO uses 2 different headunit connectors. Please make sure you have the right one for the unit that you're installing!
ATOTO A5L 7-inch model - 7-inch ONLY, NOT the 10-inch A5L (A5LG110T / A5LG110PT), which uses the standard ATOTO S8 & F7 connector instead
ATOTO A6 PF model - 7-inch and 9-inch only (7-inch A6G2A7PF sold by AutoHarnessHouse HERE!) - NOT the 10.1-inch A6G110PF, see below
ATOTO S8 Lite model
ATOTO S8 MS model (9-inch S8G2094MS sold by AutoHarnessHouse HERE!) - except the S8G1104MS / S8EG1104MSB / S81104MSFX, see below
ATOTO S8 UN (S8G2A79UN)

DOES NOT FIT ATOTO F7WE or ATOTO F7 XE or any other ATOTO F7 Variations

DOES NOT FIT ATOTO X10

The ATOTO V10 (V10G110OC) and S8 Gen4 (S84G110PB) also use a 16-pin harness, but we have not yet confirmed they use this exact connector - please email us before ordering for one of those.

DOES NOT FIT the 10.1-inch ATOTO A6 PF (A6G110PF) - despite the A6 PF name, that radio uses the standard ATOTO S8 & F7 connector instead. Click here for the adapter that fits it.

DOES NOT FIT the ATOTO S8 MS sold as S8G1104MS, S8EG1104MSB or S81104MSFX - one radio, three part numbers depending on where you bought it (this is the 10-inch floating-screen S8 MS). That radio uses the standard ATOTO S8 & F7 connector instead. Click here for the adapter that fits it.

We carry a compatible adapter for these other ATOTO models. Please email us or check out the Similar items below.

Enon Headuint Compatibility

Eonon UA13SK Plus
Eonon UA12S-Plus

Power Acoustik Headunit Compatibility

Power Acoustik CP-71W