---

Direct wire harness for ATOTO Headunits (fits 1993-2010 Subaru - Compatibility information below)

Item Number: AHH-70-8901ATOTO

Description:

This harness is the simplest way to install an ATOTO headunit in your 1993-2010 Subaru with the 14-pin connector. The 14-pin Subaru connector is pre-wired with the ATOTO connector on 1 end and the Subaru connector on the other.

What's included:

• Reverse, E-brake, and Steering wheel (KEY+ and KEY-) signals are provided from the ATOTO connector since they will need to be connected elsewhere on the vehicle. These signals are not connected to the 14-pin adapter.
• For installations with the JDM HVAC panel, see the adapters listed here: https://www.autoharnesshouse.com/AHH-JDM.html

Installation tips and Information:

1) Just connect both ends (to the ATOTO radio unit and to the Vehicle)
2) Connect the Reverse Signal if needed (Reverse is needed only if you will be connecting a backup camera)

If you have steering wheel buttons, you'll need to connect those at the 24-pin connector. To use this, use this adapter!

If you would like us to connect the 24-pin connector to the steering wheel buttons for you, just email us with this request. We don't mind making these small/custom modifications for you!

ATOTO Headunit Compatibility

ATOTO A6 KL
DOES NOT FIT ATOTO A6 PF model
ATOTO A6 (All other Variations)

ATOTO F7
ATOTO F7 XE
ATOTO F7 (All other Variations)

DOES NOT FIT ATOTO S8 Lite model
ATOTO S8 Standard
ATOTO S8 Premium
ATOTO S8 Pro
ATOTO S8 Ultra
ATOTO S8 (All other Variations)

and many other models that we haven't checked...

Purchase:

Price:$34

---

Related Products:

24-pin Wiring Adapter to fit Toyota, Subaru, Nissan Infotainment Wiring

Similar Products:

Metra 70-8901