Gear for Toyota Vehicles:


Install an aftermarket navigation or audio system

Aftermarket Headunit Installation Gear

Upgrade your OEM audio system! Click here to see the wiring that we recommend for installing an aftermarket headunit or navigation system in your Toyota.

These adapters will give you what you need to retain the backup camera and steering wheel controls as well as most other OEM functions.

CLICK HERE FOR MORE INFO


Direct Wire harness for Pioneer

The simplest way to install a Pioneer headunit in your Toyota or Scion!

If you are installing a Pioneer headunit in your vehicle, this harness skips the hassle of soldering between the Pioneer wiring and the Metra 70-1761. Connect it directly!

CLICK HERE TO CHECK COMPATIBILITY


Add a Backup Camera Harness

Backup Camera Installation Harness

The cheapest and cleanest way to add a backup camera to your car or truck!

This harness connects a 12-volt Backup Camera to the stock Toyota/Subaru/Scion head unit. The stock head unit is wired with a 6-volt output. This harness uses a 6-volt relay and the 12-volt accessory power provided to the stock head unit to provide a 12-volt output and composite video input for any standard automobile backup camera.

CLICK HERE FOR MORE INFO (for Subaru/Scion/Toyota)

**For 2014+ Toyota models, CLICK HERE**


Tundra Amp Upgrade

Toyota Factory Amp Upgrade harness(Fits Tundra)

This adapter will connect to a Toyota Non-JBL factory amp wiring harness. The adapter provides bare wire ends for connection to an aftermarket amplifier.

CLICK HERE FOR MORE INFO

Shop Pioneer Audio Gear

Additional 28-pin or 16-pin socket pins

28-pin socket

Wired socket pins to fit the 28-pin or 16-pin connector are available. These will fit the stock connector that plugs into the stereo/entertainment system.

CLICK HERE FOR MORE INFO


12-volt power port - Add-a-port harness (Fits: Toyota/Subaru/Scion)

add-a-port

Add a fused "Cigarette Lighter" power port to any Toyota or Scion(also fits some Subaru's).

CLICK HERE FOR MORE INFO


5-pin Backup camera harness/Reverse wire connector for Toyota/Scion/Lexus

10-pin toyota connector

The stock version of this connector is often Gray.

This is the 5-pin connector that connects to the back of many 2007-2012 Toyota/Scion/Lexus headunits.

The stock headunit can be configured to use a backup camera by simply providing a reverse gear signal to the headunit. This harness will make that connection for you!

CLICK HERE FOR MORE INFO


28-pin Head Unit Wiring Harness Adapter (Fits: Toyota/Subaru/Scion)

28-pin

28-pin "jumper-type" harness to fit many Subaru, Toyota, and Scion vehicles. This harness has the female and male connector. One end will connect to the factory harness and the other to the connector on the back of the head-unit or navigation system.

CLICK HERE FOR MORE INFO


12-Volt splice harness (Fits: Toyota/Subaru/Scion)

10-pin toyota connector

Provides a fused(2 amp), switched 12-Volt accessory output. Connects between standard toyota 10-pin radio/head unit connector and the stereo unit.

The harness is 100% plug and play. No splicing the stock wiring harness. Does not disturb stock appearance.

CLICK HERE FOR MORE INFO



www.autoharnesshouse.com
inquiry@autoharnesshouse.com